Beschikbare fastATE modules.

 

6TL01 cassette fixture

775,00

6TL01 cassette fixture Image

The 6TL-01, is a flexible linear cassette adapter, with a solid hinged top plate on an ergonomically shaped rugged housing. (Exchangeable cassette, 6TL01-10 is included)

Fixture kit 6TL01

Customized 6TL01 cassette & fixture Kit

The reliability and accuracy of the contact between the test pad and the test probe in a test fixture is mainly determined by the mechanical construction used to bring the two together. In the MG6TL Test adapter the linear push down construction is therefore designed using solid aluminium parts. By means of ball bearings and a specially designed sliding bus we constructed a linear system with an accurate linear movement of 12mm. This allows PCB’s to be contacted from the top and bottom simultaneously. The wide base housing provides enough space for easy access to the wiring, additional electronics or mechanics. The back side and bottom side of the housing are easy removable and can be adapted to different test system interfaces, custom configurable cable or connector interfaces, professional Mass Interconnect interfaces from VPC (S6, G12 and G12X) or MAC Panel (Titan HZ) as well as solutions for most In-Circuit Test systems. The ESD safe cassette and Pusher Plate are easy removable and have a large usable working surface, depending on the model.

6TL01 Open

6TL01 + 6TL01-10 Open

– Solid construction guarantees a smooth and reliable operation, for the entire kit
– Modular approach removable aluminium back and bottom plate for integration and easy rework.
– Easy exchangeable Cassette system with optional Mass Interconnect ITA interface System (Only 6TL-02 & 03).
– ESD, easy to replace Perspex pusher plate as part of each Cassette including pushers and PCB supports.
– Linear push down unit with 12mm linear stroke.
– Ergonomic design with gas strut support for easy opening
– One hand operation, “close and test”
– Optional switch-probe for Auto start and PCB detection.
– Maximum number of test probes: +/- 900 (2000N)
– Optional Top-Probing possible
– Optional mechanical Side-Probing possible.

Assembly information 6TL kits

Click on picture for assembly info.

Download here the brochure of the 6TL range of test fixtures.

Categorie:
6TL Test Fixtures
Subcategorie:
Mechanical lineair test fixtures

6TL01 cassette fixture

775,00

6TL01 cassette fixture Image

The 6TL-01, is a flexible linear cassette adapter, with a solid hinged top plate on an ergonomically shaped rugged housing. (Exchangeable cassette, 6TL01-10 is included)

Fixture kit 6TL01

Customized 6TL01 cassette & fixture Kit

The reliability and accuracy of the contact between the test pad and the test probe in a test fixture is mainly determined by the mechanical construction used to bring the two together. In the MG6TL Test adapter the linear push down construction is therefore designed using solid aluminium parts. By means of ball bearings and a specially designed sliding bus we constructed a linear system with an accurate linear movement of 12mm. This allows PCB’s to be contacted from the top and bottom simultaneously. The wide base housing provides enough space for easy access to the wiring, additional electronics or mechanics. The back side and bottom side of the housing are easy removable and can be adapted to different test system interfaces, custom configurable cable or connector interfaces, professional Mass Interconnect interfaces from VPC (S6, G12 and G12X) or MAC Panel (Titan HZ) as well as solutions for most In-Circuit Test systems. The ESD safe cassette and Pusher Plate are easy removable and have a large usable working surface, depending on the model.

6TL01 Open

6TL01 + 6TL01-10 Open

– Solid construction guarantees a smooth and reliable operation, for the entire kit
– Modular approach removable aluminium back and bottom plate for integration and easy rework.
– Easy exchangeable Cassette system with optional Mass Interconnect ITA interface System (Only 6TL-02 & 03).
– ESD, easy to replace Perspex pusher plate as part of each Cassette including pushers and PCB supports.
– Linear push down unit with 12mm linear stroke.
– Ergonomic design with gas strut support for easy opening
– One hand operation, “close and test”
– Optional switch-probe for Auto start and PCB detection.
– Maximum number of test probes: +/- 900 (2000N)
– Optional Top-Probing possible
– Optional mechanical Side-Probing possible.

Assembly information 6TL kits

Click on picture for assembly info.

Download here the brochure of the 6TL range of test fixtures.


het bouwen van een testsysteem met 6TL is als werken met LEGO.

FastATE van 6TL is een concept voor engineers die zelf een testsysteem willen bouwen. Voor engineers is er niets leuker dan zelf te ontwikkelen., maar dit is niet altijd verstandig. Vaak ontbreekt de basiskennis en ervaring en ontstaat er een groot gevaar in de vele valkuilen te stappen bij het ontwikkelen van een testsysteem. Doe waar u goed in bent en laat u ondersteunen en voorlichten over zaken die u normaal gesproken nooit doet.

Bedrijfspresentatie 6TL Engineering.

fastATE is een techniek die u als engineer in staat stelt een ideaal test systeem te construeren zonder het gevaar van de vele valkuilen. Het fastATE concept bestaat uit vele modules waardoor de opbouw van een testsysteem net zo eenvoudig wordt als iets bouwen met Lego. Een overzicht van een groot deel van de beschikbare modules vindt u hieronder in een lijst. Als u zich voor de vraag gesteld ziet:  BUILD OR BUY een deel of uw gehele testsystem, lees dan eerst onze informatiebrief over dit onderwerp.

Onze specialisten komen graag bij u langs om uit te leggen waarom fastATE ook voor u de beste oplossing is.
Maak eventueel gebruik van de SEND message tab, rechts onder om ons direct te contacteren.

Hieronder vindt u een opsomming van alle beschikbare fastATE modules, deze zijn sorteerbaar op categorie en productgroep. Het kan even duren voor de lijst zichtbaar wordt.
Voor prijsinformatie kunt u contact met ons opnemen of een login code aanvragen en op onderstaande pagina de prijzen zelf bekijken.


Sample modular solutions created using FastATE technology from 6TL.


Romex hi-res-logo-transp

Print Friendly, PDF & Email