Stel uw vraag of bel mij terug a.u.b. (Have a Question or call back request)

Beschikbare fastATE modules.

 
2
Yes
None
1
1000000
Zoeken...
/testsystemen/fastate-testplatforms/beschikbare-fastate-modules/

6TL

6TL Engineering Test Solutions Provider for the Electronics Manufacturing Arena 6TL is a pioneer in applying the modularity concept to the design of Automatic Test Equipment for electronics products. The FastATE technology is the core to develop turn-key solutions that are trully modular, scalable and flexible, and thus we help to make the job of both, the test engineer and the budget manager, much easier.
Thumbnail

Categorieën:

Subcategorieën:

HV (High Voltage) Switching systems
High Voltage switching matrix enables the switching between different test points, when performing dielectric strength test and Hipot test. It is featuring High Voltage relays, controlled through CAN bus. The module features one relays normally closed, with a red LED that is indicating its status. When not powered the switch, will keep J2 and J3 input terminals linked through a resistor, to ensure electric discharge of all loads after the test. Connections are made with special high voltage connectors. Input terminals from Hipot tester are in front of the module, while up to 32 outputs are in the back panel. A 4 wire connector in the back plane, is used for powering up the device and control through CAN bus.
HV (High Voltage) Switching systems
High Voltage switching matrix enables the switching between different test points, when performing dielectric strength test and Hipot test. It is featuring High Voltage relays, controlled through CAN bus. The module features one relays normally closed, with a red LED that is indicating its status. When not powered the switch, will keep J2 and J3 input terminals linked through a resistor, to ensure electric discharge of all loads after the test. Connections are made with special high voltage connectors. Input terminals from Hipot tester are in front of the module, while up to 32 outputs are in the back panel. A 4 wire connector in the back plane, is used for powering up the device and control through CAN bus.
H7300351A HV (High Voltage) Switching matrix 19 inch
890,00
H7300351A HV (High Voltage) Switching matrix 19 inch Image

H7300351A (High Voltage Mux 1×4 Ch with discharge. relay 5KV)

HV switching unit

48ch HV 15Kv switching, integrated.

– CAN bus controlled HV switching matrix
– Hipot test up to 15kV
– NC relay for discharge resistor
– Power up and High Voltage indications
– Customized configuration options
– Compact size: 19″ rack 1U height

This switching matrix enables the switching between different test poinits, when performing dielectric strenght test and Hipot test. It is featuring High Voltage relays, controlled through CAN bus. The module features one relays normally closed, with a red LED that is indicating its status, that when no power, will keep J2 and J3 input terminals linked through a resistor, to ensure electric discharge of all loads after the test. Conexions are made with special high voltage conectors. Input terminals from Hipot tester are in front of the module, while up to 8 outputs are in the back panel. A 4 wire connector in the back plane, is used for powering up the device and control through CAN bus.

beschibare HV switching units
Download the brochure in PDF,  with all information from here!!More information on the full available range of HV solutions from 5kV to 15kV you can read here!!

HV (High Voltage) Switching systems
High Voltage switching matrix enables the switching between different test points, when performing dielectric strength test and Hipot test. It is featuring High Voltage relays, controlled through CAN bus. The module features one relays normally closed, with a red LED that is indicating its status. When not powered the switch, will keep J2 and J3 input terminals linked through a resistor, to ensure electric discharge of all loads after the test. Connections are made with special high voltage connectors. Input terminals from Hipot tester are in front of the module, while up to 32 outputs are in the back panel. A 4 wire connector in the back plane, is used for powering up the device and control through CAN bus.
H7300351A HV (High Voltage) Switching matrix 19 inch Image
H7300351A HV (High Voltage) Switching matrix 19 inch
H7300351A (High Voltage Mux 1×4 Ch with discharge. relay 5KV) ... Lees meer
890,00

het bouwen van een testsysteem met 6TL is als werken met LEGO.

FastATE van 6TL is een concept voor engineers die zelf een testsysteem willen bouwen. Voor engineers is er niets leuker dan zelf te ontwikkelen., maar dit is niet altijd verstandig. Vaak ontbreekt de basiskennis en ervaring en ontstaat er een groot gevaar in de vele valkuilen te stappen bij het ontwikkelen van een testsysteem. Doe waar u goed in bent en laat u ondersteunen en voorlichten over zaken die u normaal gesproken nooit doet.

Bedrijfspresentatie 6TL Engineering.

fastATE is een techniek die u als engineer in staat stelt een ideaal test systeem te construeren zonder het gevaar van de vele valkuilen. Het fastATE concept bestaat uit vele modules waardoor de opbouw van een testsysteem net zo eenvoudig wordt als iets bouwen met Lego. Een overzicht van een groot deel van de beschikbare modules vindt u hieronder in een lijst. Als u zich voor de vraag gesteld ziet:  BUILD OR BUY een deel of uw gehele testsystem, lees dan eerst onze informatiebrief over dit onderwerp.

Onze specialisten komen graag bij u langs om uit te leggen waarom fastATE ook voor u de beste oplossing is.
Maak eventueel gebruik van de SEND message tab, rechts onder om ons direct te contacteren.

Hieronder vindt u een opsomming van alle beschikbare fastATE modules, deze zijn sorteerbaar op categorie en productgroep. Het kan even duren voor de lijst zichtbaar wordt.
Voor prijsinformatie kunt u contact met ons opnemen of een login code aanvragen en op onderstaande pagina de prijzen zelf bekijken.


Sample modular solutions created using FastATE technology from 6TL.


Romex hi-res-logo-transp

Print Friendly, PDF & Email