Beschikbare fastATE modules.

 
2
Yes
None
1
1000000
Zoeken...
/testsystemen/fastate-testplatforms/beschikbare-fastate-modules/

6TL

6TL Engineering Test Solutions Provider for the Electronics Manufacturing Arena 6TL is a pioneer in applying the modularity concept to the design of Automatic Test Equipment for electronics products. The FastATE technology is the core to develop turn-key solutions that are trully modular, scalable and flexible, and thus we help to make the job of both, the test engineer and the budget manager, much easier.
Thumbnail
Clear All

Categorieën:

Subcategorieën:

Base Test Platforms (Table-Top)
Base Test Platforms (Table-Top) are highly configurable base test systems that can be place on top of a table.
Base Test Platforms (Table-Top)
Base Test Platforms (Table-Top) are highly configurable base test systems that can be place on top of a table.
6TL-08 Compact Testing Unit
5.990,00
6TL-08 Compact Testing Unit Image

6TL08NThe 6TL-08 base platform was designed to cover the most common testing and in-system programming (ISP) needs with a reduced initial budget. The system includes a robust manual linear push mechanism allowing a low-cost fixture strategy thanks to the exchangeable cassettes.
The unit have two sizes: Narrow and Wide for PCB’s up to 250x300mm and 250x580mm. The wide size have an option Kit that allows the use of Narrow fixtures.

The platform enclosure features an 8-Slot fixture receiver,
compatible with VPC 90 Series Mass Interconnect Module, as well
as 6TL intelligent YAVModules (YAV90MMU & YAV90059), with room for fast ISP devices, optional PXI chassis and various power supplies. A removable back panel allows easy placement of custom connectors or test auxiliary circuitry.

The 6TL-08 comes in five different configurations:

Basic – as a stand-alone low cost tester with test executive software running on the YAV90MMU (programming of test sequence using an Excel® spreadsheet)

Advanced – as a stand-alone low to mid cost tester, with a PC, where LabVIEW / TestStand, Visual Basic or some other software development tool can be used to create the test sequence.

Universal – Same as Advanced, but including an advanced compact measurement unit: DMM, Function Generator, Scope, Logic Analyzer, DIO, Power supplies.

Plus and Premium – As a PXI based stand-alone compact tester, which is expanding the capabilities of the base platform up to High Frequency measurements or sophisticated SMU’s, stimulus, measurement, communications and digitizing options available. Any additional Instrumentation Bus for rack and stack instruments can be implemented.

Wide version available for big area DUTs

Download the 6TL-08 catalog here!

6TL-10 Table Top Test Base
5.880,00
6TL-10 Table Top Test Base Image

Table Top Tester
9U height 19inch rack space (360mm depth)
Man Machine interface H73000301 included
Prepared for VPC receiver S6 or G12

This test base is ideal for table top applications, where with just some YAV modules and some external instrument (stack&rack stand alone instruments or PXI chassis) the test procedure is covered.

VPC S6, 6 slots mass interconnect solution is standard, a VPC G12 or G12X are optional.
6TL machine man interface (P/N H73000301) included.
An external PC with CAN interface will be needed to control the platform and test executive.

Download the brochure of the 6TL-10 here!!

AL198 Universal Cable Tester
9.750,00
AL198 Universal Cable Tester Image

AL198 Universal Cable Tester Based on YAV technology

AL198 Cable Test SystemThe Universal Cable tester AL198 is the essential tool for production, quality control and maintenance for rapid detection of failures or errors in cables with connectors on one or both ends. It can also be a tool to help identifying leads in the production of harnesses.
The AL198 cable tester allows for testing at low voltage (from 3 to 15VDC) or testing at voltages up to 1500 VDC. The configuration depends only on the YAV modules selected, that will be integrated into the S6 receiver.
The cable tester is able to measure individual wire resistance, shorts, opens and diode values of a “golden” cable harness, saving the results as a reference. The stored golden data is then used to be compared against the test results of an identical cable harness.
The system includes a robust control panel as interface with the user, with a 10” TFT, as well as EPO function and buttons.
The AL198 tester can be configured to work with fixtures at low voltage or for Hipot, but it is not recommended fixtures mixing both techniques, since low voltage cards could be damaged by high voltage.
Test Fixtures can be easily configured for all cable test needs. Each test fixture uses VPC S6 ITA frame.

Capabilities:

– Harness test and Harness manufacture sequence stepper
– Build-in PC and TFT
– Test voltage up to 3KV
– Up to 552 test points
– High Quality Mass Interconnect receiver (> 20.000 Mates) (6 slots)
– Prepared for ergonomic labels printing
– User-friendly, menu driven software.
– No programming experience needed
– Applicable to any cable lengths, configurations and shielding
– No calibration processes required
– Performs self-learning of good wired assembly samples
– Selection of voltage, current or resistance configured for one or a group of chains.

Download here more product information.


6TL-08 Compact Testing Unit - Wide version
6.750,00
6TL-08 Compact Testing Unit - Wide version Image

6TL-08 Compact Testing Unit – Wide version

6TL08W compact test SystemSame feature set as the 6TL-08 Narrow, but accepting wider PCBs, up to 250x500mm.
Still compatible with 6TL-08 Narrow fixtures.

The 6TL-08 compact bench top platform can come with much bigger enclosure, able to receive bigger area fixture cassette kits, up to 250x500mm. It also comes in five different configurations:

Basic – as a stand-alone low cost tester with test executive software running on the YAV90MMU (programming of test sequence using an Excel® spreadsheet)

Advanced – as a stand-alone low to mid cost tester, with a PC, where LabVIEW / TestStand, Visual Basic or some other software development tool can be used to create the test sequence.

Universal – Same as Advanced, but including an advanced compact measurement unit: DMM, Function Generator, Scope, Logic Analyzer, DIO, Power supplies.

Plus and Premium – As a PXI based stand-alone compact tester, which is expanding the capabilities of the base platform up to High Frequency measurements or sophisticated SMU’s, stimulus, measurement, communications and digitizing options available. Any additional Instrumentation Bus for rack and stack instruments can be implemented.

You can download the product brochure from here.

Base Test Platforms (Table-Top)
Base Test Platforms (Table-Top) are highly configurable base test systems that can be place on top of a table.
6TL-08 Compact Testing Unit Image
6TL-08 Compact Testing Unit
The 6TL-08 base platform was designed to cover the mo... Lees meer
5.990,00
6TL-10 Table Top Test Base Image
6TL-10 Table Top Test Base
Table Top Tester 9U height 19inch rack space (360mm depth) Man Machine interface H73000301 included Prepared for VPC receiver S6 or G12 ... Lees meer
5.880,00
AL198 Universal Cable Tester Image
AL198 Universal Cable Tester
AL198 Universal Cable Tester Based on YAV technology ... Lees meer
9.750,00
6TL-08 Compact Testing Unit - Wide version Image
6TL-08 Compact Testing Unit - Wide version
6TL-08 Compact Testing Unit – Wide version ... Lees meer
6.750,00

het bouwen van een testsysteem met 6TL is als werken met LEGO.

FastATE van 6TL is een concept voor engineers die zelf een testsysteem willen bouwen. Voor engineers is er niets leuker dan zelf te ontwikkelen., maar dit is niet altijd verstandig. Vaak ontbreekt de basiskennis en ervaring en ontstaat er een groot gevaar in de vele valkuilen te stappen bij het ontwikkelen van een testsysteem. Doe waar u goed in bent en laat u ondersteunen en voorlichten over zaken die u normaal gesproken nooit doet.

Bedrijfspresentatie 6TL Engineering.

fastATE is een techniek die u als engineer in staat stelt een ideaal test systeem te construeren zonder het gevaar van de vele valkuilen. Het fastATE concept bestaat uit vele modules waardoor de opbouw van een testsysteem net zo eenvoudig wordt als iets bouwen met Lego. Een overzicht van een groot deel van de beschikbare modules vindt u hieronder in een lijst. Als u zich voor de vraag gesteld ziet:  BUILD OR BUY een deel of uw gehele testsystem, lees dan eerst onze informatiebrief over dit onderwerp.

Onze specialisten komen graag bij u langs om uit te leggen waarom fastATE ook voor u de beste oplossing is.
Maak eventueel gebruik van de SEND message tab, rechts onder om ons direct te contacteren.

Hieronder vindt u een opsomming van alle beschikbare fastATE modules, deze zijn sorteerbaar op categorie en productgroep. Het kan even duren voor de lijst zichtbaar wordt.
Voor prijsinformatie kunt u contact met ons opnemen of een login code aanvragen en op onderstaande pagina de prijzen zelf bekijken.


Sample modular solutions created using FastATE technology from 6TL.


Romex hi-res-logo-transp

Print Friendly, PDF & Email