Stel uw vraag of bel mij terug a.u.b. (Have a Question or call back request)

Beschikbare fastATE modules.

 
2
Yes
None
1
1000000
Zoeken...
/testsystemen/fastate-testplatforms/beschikbare-fastate-modules/

6TL

6TL Engineering Test Solutions Provider for the Electronics Manufacturing Arena 6TL is a pioneer in applying the modularity concept to the design of Automatic Test Equipment for electronics products. The FastATE technology is the core to develop turn-key solutions that are trully modular, scalable and flexible, and thus we help to make the job of both, the test engineer and the budget manager, much easier.
Thumbnail

Categorieën:

Subcategorieën:

Base test platforms 19 inch.
Base test platforms 19"are highly configurable base test systems that need to be placed on the floor. (Special versions with dual stage technology are availabel for combinational testing.)
Base test platforms 19 inch.
Base test platforms 19"are highly configurable base test systems that need to be placed on the floor. (Special versions with dual stage technology are availabel for combinational testing.)
H71001900 6TL-19 Off-Line Base Test Platform
4.815,00
H71001900 6TL-19 Off-Line Base Test Platform Image

The 6TL-19 is a bare half-rack with castors for creating Off-Line, modular, flexible and reliable Base test platforms. The overall rack capacity is 11U (580mm depth).

To configure your Base Test Platform, the following parts can be added to the 6TL-19 bare half-rack:
– Test Rack Manager, to control the test station.
– Power Distribution Unit.
– Uninterruptible Power Supply
– Industrial PC or NI PXI to control the platform
– 19’’ Monitor and keyboard with trackball
– VPC Mass Interconnect Receiver (6 or 12 slots)
– YAV Modules
– Accessories: Beacon, Air inlet Pneumatic kit…
– Any 19’ Instrument

Contact us for configuring your own 6TL-19!
Learn more about our Build to print service for Test Platforms.

Kies het juiste basis test platform table-top, floor mount of volledig in-line.

The 6TL-19 Platform is a perfect base for the conception of a real modular Automatic Test Equipment for low to mid manufacturing volumes.
A system designed around the 6TL-19 is simple, easy to maintain and cost effective. The rack is prepared for the direct integration of two platform based receivers from Virginia Panel, the S6, G12.
The core of the system can be either an Industrial PC or a NI-PXI. A UPS will protect the valuable instrumentation as well as control all the steps for an automatic power-up and down of the test system.
Thanks to the Test Rack Manager (MMI), interaction and control with the system, as well as the basic safeties, are implemented out-of –the-box.
Typical 6TL-19 configuration would be the one shown in the image. Order the following products to get this configuration:
– H71001900, 6TL19 Off-Line Base Test Platform
– H73000301, Test rack manager
– H72001910 S6 Kit
– H71007300, Monitor & Keyboard in lockable drawer
– MMSAI2U1000, UPS

OPTIONS

CAN bus controller Three color light tower
Thermal Transfer Label Printer Kit
Mass interconnect receiver VPC S6 for 6TL-19

The brochure on the 6TL-19 can be downloaded here!!

H71002200 6TL-22 Off-Line Testing Platform
5.735,00
H71002200 6TL-22 Off-Line Testing Platform Image

The 6TL-22 is a bare rack for creating Off-Line, modular, flexible and reliable Base test platforms. The overall rack capacity is 11U (580mm depth) plus 7U (350mm depth).

To configure your Base Test Platform, the following parts can be added to the 6TL-22 bare rack:
– Test Rack Manager, to control the test station.
– Power Distribution Unit.
– Uninterruptible Power Supply
– Industrial PC or NI PXI to control the platform
– 19’’ Monitor and keyboard with trackball (optionally, monitor in side arm)
VPC Mass Interconnect Receiver (12 or 18 slots)
YAV Modules
– Accessories: Beacon, Air inlet Pneumatic kit…
– Any 19’ Instrument

Contact us for configuring your own 6TL-22!

 

Kies het juiste basis test platform table-top, floor mount of volledig in-line.

The 6TL-22 Platform is a perfect base for the conception of a real modular Automatic Test Equipment for low to mid manufacturing volumes.

A system designed around the 6TL-22 is simple, easy to maintain and cost effective. The rack is prepared for the direct integration of the three platform based receivers from Virginia Panel, the S6, G12 and G12X.

The core of the system can be either an Industrial PC or a NI-PXI. A UPS will protect the valuable instrumentation as well as control all the steps for an automatic power-up and down of the test system.

Thanks to the Test Rack Manager (MMI), interaction and control with the system, as well as the basic safeties, are implemented out-of –the-box.

Typical 6TL-22 configuration would be the one shown in the image. Order the following products to get this configuration:
– H71002200, 6TL22 Off-Line Base Test Platform
– H73000301, Test rack manager
– H71007400 G12 Kit
– H71007300, Monitor & Keyboard in lockable drawer
– H71002190, Side adjustable kit for monitor
– MMSAI2U1000, UPS

Download the brochure of the 6TL-22 here!!

H71002300 6TL-23 Off-Line seat operation Base Test Platform
5.950,00
H71002300 6TL-23 Off-Line seat operation Base Test Platform Image

The 6TL-23 is a bare rack for creating Off-Line, modular, flexible and reliable Base test platforms. The overall rack capacity is 18U (580mm depth). The rack is ideal for sit-down operation, since there’s space for the operator’s legs under the fixture receiver.

To configure your Base Test Platform, the following parts can be added to the 6TL-23 bare rack:
– Test Rack Manager, to control the test station.
– Power Distribution Unit.
– Uninterruptible Power Supply
– Industrial PC or NI PXI to control the platform
– Monitor side mount assembly kit side arm)
– VPC Mass Interconnect Receiver (12 or 18 slots)
– YAV Modules
– Accessories: Beacon, Air inlet Pneumatic kit…
– Any 19’ Instrument

Learn about our Build to print service for Test Platforms.

H71002400 6TL-24 Combinational Base Test Platform
14.400,00
H71002400 6TL-24 Combinational Base Test Platform Image

– Dual-stage Pushing mechanism with exchangeable cassette system (FCT+ICT)
– FastATE Technology: Modular, scalable and top flexible approach; Minimum wiring and easy maintenance; LabVIEW drivers.
– Mid sized – High Mixed production batches
– Combinational Test (Combine test technoilogies while using the same test rack).
– PXI chassis direct integration for modular instrumentation approach
8-slot receiver (compatible with VPX 90 series modules).
– Platform Manager (Power, Temperature and Safety), 6TL module P/N H73000301 with EPO safety function included, and possibility to include up to 4 additional functions.
– UPS, for platform controlled power up/down and instrument asset protection.
– Keyboard with trackball and TFT on side arm
– 24U 19″ free rack space for integration of third party equipment.
– Small footprint
– CE compilant, ESD safe

6TL-24 Combinational Tester (ICT & FCT)

6TL-24 Combinational Tester (ICT & FCT)

The 6TL-24 is the Base platform ideal for Combinational test (ICT+FCT) in low to mid volume, high-mix electronics productions.

A dual-stage pushing mechanism will allow performing both, the FCT and the ICT test, without the need of changing the test platform and with a low cost fixturing technology. To do so, the exchangeable cassette fixture must be designed with two-level probes. IN the 6TL24, the second level is reached thanks to a pneumatic actuator.

6TL offers a fully configured Combination Test Platform, able to perform the most common electronics testing technologies (ICT, FCT, BS and ISP) out of the box. Ask for P/N H71002470 for more information about this configuration.

The brochure of the 6TL-24 can be downloaded here!!

H71002800 6TL-28 19inch 43U Heavy Duty Test Platform
4.800,00
H71002800 6TL-28 19inch 43U Heavy Duty Test Platform Image

The 6TL-28 is a bare rack for creating Off-Line, modular, flexible and reliable Base test platforms. The overall rack capacity is 43U (640mm depth).

To configure your Base Test Platform, the following parts can be added to the 6TL-28 bare rack:
– Test Rack Manager, to control the test station.
– Power Distribution Unit.
– Uninterruptible Power Supply
– Industrial PC or NI PXI to control the platform
– Monitor in side arm)
– VPC Mass Interconnect Receiver (12 or 18 slots)
– YAV Modules
– Accessories: Beacon, Air inlet Pneumatic kit…
– Any 19’ Instrument
Learn about our Build to print service for Test Platforms.

The 6TL-28 Platform is a perfect base for the conception of a real modular Automatic Test Equipment for low to mid manufacturing volumes.
A system designed around the 6TL-28 is simple, easy to maintain and cost effective. The rack is prepared for the direct integration of platform based receivers from Virginia Panel, like G12 and G12X.
The core of the system can be either an Industrial PC or a NI-PXI. A UPS will protect the valuable instrumentation as well as control all the steps for an automatic power-up and down of the test system.
Thanks to the Test Rack Manager (MMI), interaction and control with the system, as well as the basic safeties, are implemented out-of –the-box.
Typical 6TL-28 configuration would be the one shown in the image. Order the following products to get this configuration:
– H71002800, 6TL28 Off-Line Base Test Platform
– H73000301, Test rack manager
– H71006800 – Working area lifter for G12X
– VP310104410 – Receiver 18-Slots G12x, w/15″ platform
– H71002190, Monitor & Keyboard in side orientable support
– VP310113566, Adjustable Leg Kit for the 20″ Platform
– MMSAI2U1000, UPS

H71002900 6TL-29 Off-Line Testing Platform
25.575,00
H71002900 6TL-29 Off-Line Testing Platform Image

• Compact, transportable and modular platform. Free available rack space: 29U height
• Ready for ICT, FCT, Boundary Scan, HiPot, Vision or any combination of the previous technologies.
• MMI and Power Management Unit P/N H73000700
• Industrial PC with free PCI slots
• Mass interconnect Receiver from Virginia Panel (Available options G12 and G12X)
• Ready for different fixuring technologies
• Ready to be used with YAV modules as switching technology or other switching modules (24Vdc Power Supply included)
• Ready for operation with Servo drived automatic pushing mechanism

6TL-29 Testing platforms are based on modularity concept; its construction is completely modular and scalable, allowing the user to take advantage of a powerful and reliable platform with a minimum investment.

The platoform is compact and due to its reduced footprint can be integrated easily in any production line. It’s ideal for High-Mix Low-Mid Volume production environments.

The standard supply of the platform includes the fixtures receiver with a multipurpose I/O module, as well as two 19 inch rack frames to stack COTS instruments. Lower 19” rack has 14 free space Units. Front upper rack has 6U and is used for MMI, UPS and 2 free U.

The control can be done by IPC or by an PXI chassis, to integrate PXI instruments on it.

When talking about Receiver capacity, two options have been taken into consideration:
• VPC G12 (12 slots for tripaddle and quadrapaddle VPC modules) for general purpose applications
• VPC G12X (18 slots) for more demanding applications. G12X receivers are compatible with G12 fixtures.

Ordering information:

Included as standard in all P/Ns:
• MMI & Power input module, P/N H73000700
• Industrial PC with UPS, Keyboard and 17” TFT
• CAN bus controller PCI board
• Switching module including: CAN bus backbone cable for YAV modules, YAV90832 multifunction board

OPTIONS

CAN bus controller Three color light tower
Flipper (Precission pushing system with flip)

FIXTURES COMPATIBLES

Fixture Kit Off-line w/o pushing mechanism, 358x232mm
Fixture Kit 358x232mm G12X Off-Line

More downloadable information can be found on our download page here!!

Base test platforms 19 inch.
Base test platforms 19"are highly configurable base test systems that need to be placed on the floor. (Special versions with dual stage technology are availabel for combinational testing.)
H71001900 6TL-19 Off-Line Base Test Platform Image
H71001900 6TL-19 Off-Line Base Test Platform
The 6TL-19 is a bare half-rack with castors for creating Off-Line, modular, flexible and reliable Base test platforms. The overall rack capacity is 11U (580mm depth).... Lees meer
4.815,00
H71002200 6TL-22 Off-Line Testing Platform Image
H71002200 6TL-22 Off-Line Testing Platform
The 6TL-22 is a bare rack for creating Off-Line, modular, flexible and reliable Base test platforms. The overall rack capacity is 11U (580mm depth) plus 7U (350mm depth). To configure your Base Test Platform, the following parts ca... Lees meer
5.735,00
H71002300 6TL-23 Off-Line seat operation Base Test Platform Image
H71002300 6TL-23 Off-Line seat operation Base Test Platform
The 6TL-23 is a bare rack for creating Off-Line, modular, flexible and reliable Base test platforms. The overall rack capacity is 18U (580mm depth). The rack is ideal for sit-down operation, since there’s space for the operator’s legs under the fixture receiver. ... Lees meer
5.950,00
H71002400 6TL-24 Combinational Base Test Platform Image
H71002400 6TL-24 Combinational Base Test Platform
– Dual-stage Pushing mechanism with exchangeable cassette system (FCT+ICT) – FastATE Technology: Modular, scalable and top flexible approach; Minimum wiring and easy maintenance; LabVIEW drivers. – Mid sized – Hi... Lees meer
14.400,00
H71002800 6TL-28 19inch 43U Heavy Duty Test Platform Image
H71002800 6TL-28 19inch 43U Heavy Duty Test Platform
The 6TL-28 is a bare rack for creating Off-Line, modular, flexible and reliable Base test platforms. The overall rack capacity is 43U (640mm depth). To configure your Base Test Platform, the following parts can be added to the 6TL-... Lees meer
4.800,00
H71002900 6TL-29 Off-Line Testing Platform Image
H71002900 6TL-29 Off-Line Testing Platform
• Compact, transportable and modular platform. Free available rack space: 29U height • Ready ... Lees meer
25.575,00

het bouwen van een testsysteem met 6TL is als werken met LEGO.

FastATE van 6TL is een concept voor engineers die zelf een testsysteem willen bouwen. Voor engineers is er niets leuker dan zelf te ontwikkelen., maar dit is niet altijd verstandig. Vaak ontbreekt de basiskennis en ervaring en ontstaat er een groot gevaar in de vele valkuilen te stappen bij het ontwikkelen van een testsysteem. Doe waar u goed in bent en laat u ondersteunen en voorlichten over zaken die u normaal gesproken nooit doet.

Bedrijfspresentatie 6TL Engineering.

fastATE is een techniek die u als engineer in staat stelt een ideaal test systeem te construeren zonder het gevaar van de vele valkuilen. Het fastATE concept bestaat uit vele modules waardoor de opbouw van een testsysteem net zo eenvoudig wordt als iets bouwen met Lego. Een overzicht van een groot deel van de beschikbare modules vindt u hieronder in een lijst. Als u zich voor de vraag gesteld ziet:  BUILD OR BUY een deel of uw gehele testsystem, lees dan eerst onze informatiebrief over dit onderwerp.

Onze specialisten komen graag bij u langs om uit te leggen waarom fastATE ook voor u de beste oplossing is.
Maak eventueel gebruik van de SEND message tab, rechts onder om ons direct te contacteren.

Hieronder vindt u een opsomming van alle beschikbare fastATE modules, deze zijn sorteerbaar op categorie en productgroep. Het kan even duren voor de lijst zichtbaar wordt.
Voor prijsinformatie kunt u contact met ons opnemen of een login code aanvragen en op onderstaande pagina de prijzen zelf bekijken.


Sample modular solutions created using FastATE technology from 6TL.


Romex hi-res-logo-transp

Print Friendly, PDF & Email